Skip to content

Polytec vs Laminex: What Is the Difference?

The two big board brands, their finishes and melamine vs laminate.

Brett FieldOwner, Field Carpentry8 min read
Kitchen with a large island bench

Polytec and Laminex are two Australian makers of the same kinds of kitchen surface: melamine board for doors and cabinets, high pressure laminate for benchtops, and vinyl-wrapped doors. The real differences are each brand's colours, finishes and warranty fine print, which we compare below from their own data sheets and warranty documents.

Below is who each maker is, what melamine and laminate mean, how the colours, moisture-resistant boards and warranties compare, and whether you can mix the two in one kitchen. Every fact comes from the makers' own websites, data sheets and warranties, checked on 16 November 2026. There are no brand prices here, because neither maker publishes a price list for home owners.

What is the difference between Polytec and Laminex?

They are separate companies with close to the same line-up. Polytec is the brand of Porta Products Pty Ltd. It says it was started on the Central Coast of NSW more than 30 years ago by brothers Michael and John Borg. Laminex is Laminex Group Pty Limited, which says it has been part of Australian life for more than 90 years.

RangePolytecLaminex
Melamine doors and panelsDecorative range, on E0 moisture-resistant MDFDesignEdge doors and Lamiwood board, on E0 moisture-resistant MDF
Vinyl-wrapped doorsThermolaminated doors and panelsFormWrap doors and panels
Painted doorsRaw and pre-primed routed MDF panels, for a painter to finishColourTech doors, finished in 2 pac
Benchtop laminateLaminate (HPL) and postformed benchtopsLaminex Laminate (HPL), plus the Formica brand
Thick solid laminateXenolith and compact laminateLaminex Compact Laminate
Where it is madeSays it is certified Australian Made and OwnedSeven plants in four states, including Gympie in Queensland (raw particleboard and MDF)

Source: each maker's own website and documents, checked 16 November 2026.

You will not find either brand on a shop shelf as a finished kitchen. Polytec says home owners must buy through one of its approved customers, such as a local cabinet maker. In practice that means you choose the colour and finish, and your cabinet maker orders it.

Is melamine the same as laminate?

No. Both are decorative paper set hard in resin, but they are made differently and go in different places. Melamine is pressed straight onto a board. Laminate is a thin, separate sheet that is glued onto a board.

Melamine (LPM)Laminate (HPL)
Full nameLow pressure melamineHigh pressure laminate
How it is madeA decor layer bonded to both sides of the board at the factoryResin-soaked decor and kraft papers pressed under heat and high pressure into a sheet
Thickness of the surfacePart of the boardAbout 0.7 mm (Polytec)
Where Polytec says it is usedKitchen, laundry, bathroom and wardrobe doors and panelsBenchtops, desktops and counter tops

Source: Polytec's glossary and FAQ, and Laminex's Made-to-Measure brochure (November 2026).

The names get mixed up, even by the makers. Laminex calls Lamiwood "melamine faced MR MDF", but its own brochure lists its melamine doors under "Laminate (LPM)". It also calls its Colour Collection a range of laminates. So when a quote says "laminate", ask which one: LPM board for doors, or HPL sheet for the benchtop.

Polytec's laminate benchtops are HPL wrapped over a low density fibreboard (LDF) core, which it says is moisture resistant. For how a laminate benchtop compares with stone on price and wear, see our guide to laminate vs stone benchtops.

Which brand has more colours and finishes?

We cannot say for sure. Polytec says it has "over 300 colours" across 10 finishes. Laminex does not publish a total on the pages we checked. It sorts its Colour Collection into four groups: Whites and Neutrals, Woodgrains, Minerals and Accents.

Some finishes worth knowing by name:

  • Polytec: Matt, Woodmatt, Ravine (a raw timber feel), Legato (super matt), Venette (pure matt, made to resist fingerprints), Texture, Gloss, and Ultraglaze and Ultramatt (acrylic).
  • Laminex: Natural, Flint, Silk, Chalk, Nuance, DiamondGloss, AbsoluteMatte (super matt, fingerprint resistant, with antibacterial protection), AbsoluteGloss and AbsoluteGrain.

Matching your doors to your benchtop is easy within one brand. Laminex says its ten new 2027 colours come in both HPL and melamine. Polytec says its wrapped doors have selected matching melamine and HPL options.

Colours look different on a screen. Polytec says so itself and suggests a free sample, which it posts in 2 to 10 business days. Laminex also sends samples. Hold them up in your own kitchen, by day and at night, before you choose.

Do Polytec and Laminex make moisture-resistant board?

Yes, both do. Both makers put their made-to-measure kitchen doors on moisture-resistant (MR) MDF with an E0 emission rating:

  • Polytec's melamine, thermolaminated and Ultraglaze doors are made from its E0 MR MDF.
  • Laminex's DesignEdge doors use 16 or 18 mm E0 MR MDF. Its FormWrap and ColourTech doors use 18 mm E0 MR MDF.
  • For cabinet boxes, Polytec makes MR particleboard from 16 to 33 mm thick, rated E1. Laminex sells MR particleboard under its Trade Essentials brand.

Moisture resistant is not waterproof. Polytec says that, like any wood-based panel, its MR MDF "cannot be made totally waterproof". It asks you to wipe up spills straight away and keep doors away from steam.

That matters in a humid kitchen. Sparky's Brisbane cabinetry guide (September 2026) says HMR (high moisture resistant) board is the minimum for cabinet boxes there. Our guide to MDF vs particleboard compares the boards in detail, with the makers' swell and screw-holding figures.

What warranty do Polytec and Laminex give?

Both give 7 years on their door, board and laminate ranges. Both cover manufacturing defects only, not wear and tear.

ProductPolytec (Sept 2026)Laminex
Melamine doors and panels7 years (Decorative range)7 years (Lamiwood decorated MDF)
Vinyl-wrapped doors7 years (Thermolaminated)7 years (FormWrap, issued Dec 2025)
Benchtop laminate7 years (Laminate, and benchtops Polytec makes)7 years (Impressions Laminate)
Xenolith and compact laminate10 yearsNot compared

Source: Polytec's Limited Warranty Terms and Conditions and the warranty documents in the Laminex document library, opened 16 November 2026.

The fine print is where they differ:

  • Polytec does not cover white or coloured carcass board under its decorative warranty. The product must be installed to the Australian domestic kitchen standard, and you need the sales order number to claim.
  • Laminex FormWrap must be reported within 7 days of you noticing a defect. It is not covered on flat (horizontal) surfaces, or north of Noosa Heads.
  • Both exclude damage from water, steam, heat, harsh cleaners and fading.

Both also say their warranty sits on top of your rights under the Australian Consumer Law.

Which is better for kitchen doors and benchtops?

Neither wins across the board. They make the same types of product with the same 7-year warranties, so choose on the look and on what your cabinet maker can get. Things to weigh:

  • Colour and finish. Pick the one you like in your own light, then check the other brand for a near match.
  • Door style. Melamine doors cost the least. Laminex's own brochure rates its melamine doors $, its vinyl-wrapped doors $$ and its 2 pac doors $$$. Wrapped and painted doors can be routed into styles like Shaker.
  • Heat. Wrapped doors need heat deflectors beside the oven, by both makers' rules.
  • A colour neither makes. A 2 pac kitchen can be sprayed in any colour. Laminex sells 2 pac doors, and Polytec sells routed MDF for a painter to finish.
  • Lead time. Ask your cabinet maker which range they stock or can order quickly.

For dollar figures by door finish and cabinet type, see our guide to kitchen cabinet costs.

Can you mix Polytec and Laminex in one kitchen?

Yes. A cabinet maker can use one brand for the doors and the other for the benchtop. Just know two things before you do.

  • Colours do not cross over. Each brand names and prints its own colours, and neither promises a match with the other. Laminex even warns its own colours can vary from one board type to another. Polytec does not match timber or stone grain across a join. Put the two samples side by side before you order.
  • Each warranty covers only its own product. Keep the invoice with each product name, colour and order number. Polytec needs its sales order number for any claim.

Mixing makes sense when one brand has the benchtop you love and the other has the door. It just makes the sample check more important.

In Queensland, kitchen work valued over $3,300 needs a QBCC licensed contractor. The QBCC's cabinet making licence class covers installing and repairing fitted kitchen cabinets on site. We plan and fit kitchens across the Gold Coast, from full renovations to new doors and benchtops. We do not make board or doors: they come from a cabinet maker or supplier, and we fit them. See our kitchen renovation page for what we do, or try our free kitchen renovation cost calculator for a whole-kitchen number.

Where do these figures come from?

Checked on 16 November 2026: Polytec's website (products, colours, glossary, FAQ and about pages, undated), its Limited Warranty Terms and Conditions (last updated September 2026), and its data sheets for melamine MDF doors (July 2026), MR particleboard (May 2026) and thermolaminated doors (May 2026). Laminex's website (Australian manufacturing and brand pages, undated), its Made-to-Measure Doors and Panels brochure (November 2026), Colour Collection brochure (August 2026) and 2027 Colour Collection flyer (undated), and its warranties for FormWrap doors (issued December 2025), Lamiwood decorated MDF and Impressions Laminate (both effective 1 August 2019, still current in its library). Sparky, kitchen cabinetry cost Brisbane (updated September 2026). The QBCC pages on licences (reviewed August 2021). Brand claims are what each maker says about itself. We will check these facts again every three months.

See our kitchen renovations work, or check what your job will cost.

Filed under Kitchens

Free price check

What will your job cost?

3 quick questions, then a Gold Coast price range. No details needed.

Question 1 of 3

What's the job?
Brett Field Free price check