Skip to content

Steel or Timber Frame: Which Is Better for a House?

Termites, wind, moisture and renovating, side by side.

Brett FieldOwner, Field Carpentry7 min read
White front stairs and entry door

Neither frame is better for every house. Steel does not rot or shrink and termites cannot eat it, while timber is easier for a carpenter to cut, fix to and change later, and the Australian Government's YourHome guide says both can make comfortable homes. In Queensland both are built to the same code, and a steel-framed home still needs termite protection.

Below is a side-by-side table, the Queensland termite rules for each frame, how each one copes with wind and moisture, and what each means when you renovate. Everything was checked on 16 November 2026. We have not put prices in: we could not find a frame-only price from a dated cost guide, so ask each quote to show the frame as its own line. This is a short summary, not engineering advice.

What is the difference between a steel and a timber frame?

The frame is the skeleton of the house. Walls, floors, roof, windows and doors all fix to it. YourHome says timber and steel are the two most used framing materials, and that building today generally favours making wall frames and roof trusses in a factory. NASH, the steel framing industry body, says steel frames arrive pre-made and labelled, ready to stand up.

What we compared (source)Steel frameTimber frame
Wall frame depth (YourHome)Usually 70 or 90 mmUsually 70 or 90 mm, with 35 or 45 mm thick studs
Stud spacing (YourHome)Similar to timberUsually 450 to 600 mm
Termites (NCC 2022)Steel is not subject to termite attackNeeds treated or naturally resistant timber, or a termite system
Water damage (YourHome)Can rust if the coating is damagedCan rot or grow mould if it stays wet
Moisture movement (WoodSolutions, BlueScope)BlueScope says its steel will not twist or warpShrinks or swells as it dries or takes up moisture
Heat flow (YourHome)Passes heat easily, so it always needs a thermal breakA natural insulator, no extra break in most climates
Fire (YourHome, BlueScope)Will not catch fire, but loses strength fast when hotHolds its strength longer than steel in a fire
Long spans (YourHome)Stronger in tension, so it can span further or be thinnerEngineered timber such as LVL is used for long spans
Who puts it up (YourHome)Needs different skills and toolsTraditionally carpenters

You can mix them. YourHome says one house can use both, such as timber wall frames with long-span steel floor joists, picking each where it works best.

For how far apart the studs sit in each kind of wall, see our guide to stud spacing in Australia.

Are steel frames termite proof?

The steel is, but the house is not. The National Construction Code 2022 (NCC) lists steel as a material that is "not subject to termite attack". BlueScope says a frame made from its TrueCore steel is "100% termite and borer proof".

YourHome is careful to add that a steel frame "does not remove the need for termite protection". Termites can still get into a steel-framed home and eat the paper on plasterboard, the joinery and even books.

Queensland goes one step further. In the Queensland version of the code, the parts of a house that need protecting from termites include door jambs, window frames and reveals, architraves and skirtings, as well as the frame. If those parts are not made from a material the code lists as termite resistant (metal, concrete, masonry, fibre cement, or naturally resistant or treated timber), they still need a termite management system.

NASH points to a 2002 survey it paid for. It covered 263 Sydney homes: one in eight timber-framed homes had termite damage, and none of the 119 steel-framed homes did. It is one industry-funded study from one city, so treat it as a pointer, not proof.

What termite protection does a timber frame need in Queensland?

Either termite-resistant timber, or a termite management system that meets the Queensland rules. NCC 2022 Part 3.4 says timber that is preservative treated, or naturally termite resistant, to the standard AS 3660.1 counts as not subject to attack. The QBCC says termites are a problem for homeowners throughout Queensland.

Hyne, for example, sells its T2 Blue treated pine for indoor, above-ground framing south of the Tropic of Capricorn, which takes in the Gold Coast. Hyne gives it a 25-year guarantee against structural termite attack.

Where a house uses a termite management system, Queensland adds its own rules:

  • the system must have a design life of at least 50 years for a house, unless it is easy to get to and can be topped up or replaced
  • a chemical barrier around the outside must go in a dug trench that is treated and backfilled, under a concrete strip at least 50 mm thick and 300 mm wide
  • the system must be picked from a Queensland table that lists which types suit a slab and which suit a raised floor

Any system also needs a lasting notice in a place you will see it, such as the meter box, saying what was used and how often to inspect. Our guide to termite damage repair costs covers inspections and what repairs cost.

Which frame handles wind better?

Neither one by default. YourHome says that with either material, the bracing and tie-downs must be designed and fitted to the NCC and the wind-loading standards. Those are the braced walls, straps and bolts that tie the roof to the walls and the walls to the floor.

The NCC sets out which standard each frame is designed to. Steel house frames follow the NASH Standard for residential and low-rise steel framing, or the general steel structures standards. In Queensland, timber house frames follow AS 1684 (with separate parts for cyclonic and non-cyclonic areas) or AS 1720.1.

YourHome adds that areas with extreme (cyclonic) winds have their own standards with extra fixing rules, again for both materials.

So the question to ask is not "steel or timber?" but "what wind rating is my house built for?". Our guide to wind ratings N1 to N4 explains what the ratings mean and how to find yours.

Do timber frames move or twist?

They can, as their moisture changes. WoodSolutions, a timber industry technical site, says wood keeps trading moisture with the air until it matches its surroundings. Timber that arrives much wetter or drier than that level "will shrink or swell as it adjusts". That can mean gaps, distortion or stressed joints.

Wood moves most across its width and hardly at all along its length, so a stud barely changes in height. Seasoning (air or kiln drying) brings timber down to a moisture level that suits its use, says WoodSolutions.

Steel does not shrink or swell with moisture. BlueScope says TrueCore frames will not twist or warp, so there is "less chance of sticking windows" and jammed doors. Steel has its own catches: YourHome says it can rust where the coating gets damaged, and it passes heat so easily that it needs a thermal break, or it can cause cold spots and condensation.

Near the beach, ask the frame maker which coating suits your site. YourHome says steel framing can last a very long time if it is treated to the right level for how corrosive the site is.

Which frame is easier to renovate later?

Usually timber. YourHome says carpenters are skilled and tooled up to work with timber, while steel framing needs different skills and tools. Hyne says the same of its treated pine: it is easy to cut, notch or drill, which helps with future renovations.

Steel is not hard to work on, just different:

  • Pipes and cables. Steel frames have pre-punched holes for services. YourHome says cables need cushioning grommets where they pass through.
  • Fixings. NASH says brackets and fittings are screwed on with self-drilling screws, and that hardened steel nails and screws are made for fixing architraves and skirtings.
  • Drilling. In either frame, YourHome warns trades not to drill near the edge of a stud (its structural zone).

Moving or removing a wall is the bigger job. Before any wall comes out, check whether it is holding something up. Our guide on how to tell if a wall is load bearing covers that. For any structural change, an engineer or certifier has the final say.

We work on timber framing in renovations across the Gold Coast: new stud walls, door and window openings, and replacing termite-damaged timber. Brett holds QBCC licence 15316127 and books licensed electricians and plumbers for their parts. See our carpentry page.

Where do these figures come from?

Checked on 16 November 2026: YourHome (Australian Government), lightweight framing (undated); the National Construction Code 2022 from the Australian Building Codes Board, Housing Provisions Part 3.4 (clauses 3.4.1 to 3.4.3, with the Queensland variations), Volume Two Part H1 (clause H1D6, with the Queensland variation) and the glossary's Queensland definition of a primary building element (no page dates shown); BlueScope, TrueCore steel home page (undated); NASH, the National Association of Steel-Framed Housing, pages on structural pests, ease of use and wiring (undated; the survey is from 2002); WoodSolutions, moisture guide (undated); Hyne Timber, T2 Blue treated pine (undated); and the QBCC page on protecting against termites (March 2024). We will check these figures again every three months.

See our carpentry work, or check what your job will cost.

Filed under Carpentry

Free price check

What will your job cost?

3 quick questions, then a Gold Coast price range. No details needed.

Question 1 of 3

What's the job?
Brett Field Free price check